Publicidad
Enlaces rápidos
AUTOMOTIVE PRODUCTS, INC.
STEP BAR ASSEMBLIES
ENSAMBLES DE ESTRIBOS
MONTAGES DE MARCHE-PIEDS
23-2630
23-2635
ITEM
QTY
1,2
2
STEP BAR, PASSENGER (1) AND DRIVER (2)
3
2
FRONT BRACKET
4,5
2
SUPPORT BRACE, PASSENGER (4) AND DRIVER (5)
6,7
2
REAR BRACKET. PASSENGER (6) AND DRIVER (7)
8
2
M10 BOLT PLATE
9
4
1/2-13 X 2.00" HEX HEAD BOLT
10
4
1/2" FLAT WASHER
11
4
1/2" LOCK WASHER
12
2
M10 FLAT WASHER
13
2
M10 LOCK WASHER
14
2
M10-1.5 HEX NUT
15
2
PLASTIC WASHER
1,2
2
ESTRIBOS, ACOMPAÑANTE
3
2
SOPORTE DELANTERAS
4,5
2
PIEZA DE SUJECIÓN DEL SOPORTE, ACOMPAÑANTE
6,7
2
SOPORTE TRASERAS, ACOMPANANTE (6) Y CONDUCTOR(7)
8
2
PLACAS DE PERNOS
9
4
PERNOS CON CABEZA HEXAGONAL 1/2-13 X 2,00"
10
4
ARANDELAS PLANAS DE 1/2"
11
4
ARANDELAS DE PRESIÓN DE 1/2"
12
2
ARANDELAS PLANAS DE M10
13
2
ARANDELAS DE PRESIÓN DE M10
14
2
TUERCAS HEXAGONALES DE M10-1,5
15
2
ARANDELA DE PLÁSTICO
1,2
2
MARCHE-PIEDS, PASSAGER
3
2
SUPPORT DE AVANT
4,5
2
RENFORTS POUR SUPPORTS, PASSAGER
6,7
2
SUPPORT DE ARRIERE, PASSAGER (6) ET CONDUCTOR(7)
8
2
PLAQUES DE BOULON M10
9
4
BOULON A TETE HEXAGONALE 1/2-13 X 2,00 PO
10
4
RONDELLE PLATE 1/2 PO
11
4
RONDELLE A FREIN DE 1/2 PO
12
2
RONDELLE PLATE M10
13
2
RONDELLE A FREIN DE M10
14
2
ÉCROUS HEXAGONAUX M10-1.5
15
2
RONDELLE DE PLASTIQUE
STEP 1.
Remove the contents from box and check for damage. Verify all parts are present. Read instructions completely
before beginning.
STEP 2.
Remove existing body mount bolts. Body mount bolts will be used for step bar installation.
STEP 3.
Install front bracket to body mount using factory hardware. Install rear bracket, secure using factory hardware.
Hand tighten only.
STEP 4.
Determine passenger and driver support braces. Attach plastic washer to bolt plate. Insert bolt plate into slotted
hole on the bottom of frame. Attach support brace to bolt plate using M10 fasteners as shown.
1 AND 2.
Leave loose. Attach support brace to the back side of the front bracket and to step bar tube using
the 1/2-13 x 2.00" bolt, 1/2" lock washer, and 1/2" flat washer as shown.
NOTE:
Support brace will not sit flat against the bracket or the frame. When the bolts are tightened, the
support brace will conform to the bracket and the frame.
STEP 5.
Attach step bar to rear bracket using the 1/2-13 x 2.00" bolt, 1/2" lock washer, and 1/2" flat washer as shown.
SEE FIGURE 2.
INSTRUCTIONS-INSTRUCCIONES-CONSIGNES
APPLICATION: 2004-08 DODGE DURANGO
APLICACIÓN: DODGE DURANGO, 2004-08
APPLICATION: DODGE DURANGO 2004-08
1
2
CONTENTS -
CONTENIDO
(1)
Y CONDUCTOR
(1)
ET CONDUCTOR
SEE FIGURE 2.
2007-08 CHRYLSER ASPEN
CHRYSLER ASPEN, MOD. 2007-08
CHRYSLER ASPEN 2007-08
- CONTENU
(2)
(4)
Y CONDUCTOR
(2)
(4)
ET CONDUCTOR
(5)
4
3
6
TOOLS -
HERRAMIENTA
3/4" SOCKET
19MM SOCKET
18MM SOCKET
17MM SOCKET
RATCHET
TORQUE WRENCH
DADO DE 3/4
"
DADO DE 19MM
(5)
DADO DE 18MM
DADO DE 17MM
MANERAL
LLAVE DE TORQUE
DOUILLE 3/4 PO
DOUILLE 19MM
DOUILLE 18MM
DOUILLE 17MM
CLIQUET
CLE DE COUPLE
SEE FIGURE 2.
REVISION A 4/18/08
5
7
- OUTILS
SEE FIGURES
Publicidad
Manuales relacionados para Westin 23-2630
Resumen de contenidos para Westin 23-2630
- Página 1 APLICACIÓN: DODGE DURANGO, 2004-08 CHRYSLER ASPEN, MOD. 2007-08 APPLICATION: DODGE DURANGO 2004-08 AUTOMOTIVE PRODUCTS, INC. CHRYSLER ASPEN 2007-08 STEP BAR ASSEMBLIES ENSAMBLES DE ESTRIBOS MONTAGES DE MARCHE-PIEDS 23-2630 23-2635 ITEM CONTENTS - CONTENIDO - CONTENU TOOLS - HERRAMIENTA - OUTILS STEP BAR, PASSENGER (1) AND DRIVER (2) 3/4”...
- Página 2 FINISH PROTECTION Westin products have a high quality finish that must be cared for like any other exposed finish on the vehicle. Protect the finish with a non-abrasive automotive wax, (e.g. Pure Carnauba) on a regular basis. The use of any soap, polish or wax that contains an abrasive is detrimental, as the compounds scratch the finish and open it to corrosion.
- Página 3 FIGURA 2 LADO DEL CONDUCTOR, OPUESTO AL LADO DEL ACOMPAÑANTE FIGURE 2 COTE PASSAGER EN FACE: COTE CONDUCTEUR Thank You for choosing Westin products Westin Automotive Products, Inc. For additional installation assistance please call 5200 N. Irwindale Ave. Suite 220 Irwindale, Ca. 91706...