HOW TO CLEAN CONTAINERS
WITH NONREMOVABLE BLADES
. Remove the container from the unit base . Remove the
lid . Add a cup of cleaning solution, made by adding a
few drops of dishwashing detergent to cup of cool
water, to the container . Scrub and flush out the interior of
the container and the lid to dislodge and remove as
much residue as possible . empty the container .
2 . Add more cleaning solution . Put lid on container, place
container on unit base, and run on high speed for
two minutes .
3 . empty the container and repeat as above, using clean
rinse water in place of cleaning solution . empty, rinse
and dry, prior to storing unit .
4 . Wash and rinse container prior to initial use, and
immediately after each use .
HOW TO CLEAN UNIT BASE
. To clean the unit base, unplug the power cord .
Wipe the exterior surfaces with a soft cloth or spong
dampened with cleaning solution . Rinse with clean water .
Do not immerse the base in cleaning solution or water .
Wipe the base with a dry towel .
08wi11489_pb_mb_ib.indd
5
5
2/17/09
11:19:36