Handicare Coral Manual De Instrucciones página 7

Assembly
Coral shower chair
3002010140
1
1. Slide the cover on the straight part
of the chair leg (2x).
4
4. Slide the frame of the backrest in the
rear pockets of the seat.
M A N U A L
2
2. Position the chair leg with cover
(2x) on the seat. Make sure that all
pins of the seat fully protrude the chair
leg and the cover.
5
5. Slide the base plate over the
front chair legs.
Make sure that the rear pins of the
seat fully protrude the base plate.
Push the base plate onto the
seat until all clickers snap into
place.
3
3. Make sure that the chair leg and
covers are well fitted in the seat. Lay
this part on a table for easier
assembly of the back support.
6
6. Mount the safety lock (2x) on the
protruding pin.
Make sure that both safety locks are
screwed on tightly.
English
7