AXIS P33-VE Series Installation Guide
Access the Product
Use the tools provided on the Installation and Management Software CD to assign an IP address,
set the password and access the video stream. This information is also available from the support
pages on www.axis.com/techsup/
Adjust the Lens
Adjusting the focus and zoom manually can damage the lens.
Do not tilt the lens more than 90°, this may cause damage to the product. See the
illustration below.
If it is necessary to tilt more than 90°, do the following:
1. Loosen the pan screw.
2. Rotate the lens 180°.
3. Tilt the lens.
Page 21