Function Setting - TTM BIG100 Professional Manual Del Usuario

Please ensure the phone is placed in a dry and ventilated place without corrosive air.
u
! Please install 3 x AA batteries for viewing the LCD display. If the LCD does not display
u
clearly, please change the batteries.
Before operation, please check if you had applied for caller ID service from Telecom for
u
caller ID display.
FEATURES:
• FSK/DTMF dual system
• 61 incoming call memories, call back function
• 16 outgoing call memories and conversation time review and redial back
• 61 VIP numbers
• Local area code filter
• Pre-dial number and call out
• LCD display of year, month, date and time
• 20 ringer tone selection
• IDD 3 level Lock function
• Back light display
• 10 two touch memory
• 5 levels of LCD contrast
• Alarm function
• Hold with music
• Thunder-proof and protection against steal operation
• Hands-free dialing and speaking function
OPERATION:

1.Function setting:

In on-hook mode,Press and hold SET/STORE key to enter menu setting, the
phone LCD will display SET 1 DATE, press UP or DOWN key to select different
options.
Press SET/STORE key again to confirm. Use UP or DOWN key to select the
mode you need.
After completing the setting, press SET/STORE key to go to the next item. To
exit menu, press DEL key.
By pressing SET/STORE key (in the on-hook mode), you can select the
following:
SET ITEM OPERATIONS
DATE/TIME
Press SET/STORE key, LCD panel displays SET 1 DATE, press
SET/STORE key to enter this mode. The year value would
flash, use UP or DOWN key to select value, then press SET/
STORE key to move to next item.
AREA CODE
Press SET/STORE key and press UP key ,LCD panel display
SET 2 CODE, press SET/STORE key to confirm, LCD display
CODE, press SET/STORE key to enter this mode. Use UP or
DOWN key to select value, then press SET/STORE key to
move to next item.
Area Code is used to filter the number for incoming calls.
E.g. Area code = 75 when there's incoming call with 75
6554556, it will be displayed as 655 4556 only.
PABX CODE Press SET/STORE key and press UP key 2 times,LCD panel
display SET 3 PCODE, press SET/STORE key to enter this
mode. LCD displays PCODE, use UP or DOWN key to select
value, then press SET/STORE key to confirm.
To activate this feature, while on-hook, dial the number
then press REDIAL/BACK. When the first number matches
the PCODE, the telephone will dial the first number follo-
wed by a pause then continue with the rest of the number.
AUTO-IP Press SET/STORE key and press UP key 3 times,LCD display
SET 4 AUTO IP, press SET/STORE key to enter this mode.
LCD display AUTO IP OFF and OFF will flashes, use UP or
DOWN key to select value. When LCD displays AUTO IP
ON, press SET STORE key. Then the LCD will display INPUT
CODE for you to enter the IP numbers. Use DEL key to
correct any wrong input. After entered all IP number, press
SET/STORE key to confirm.
After you have set a number on Auto IP, e.g. 1455. If you
need to call any number that starts with 14550, just type 0
to represent 1455 then follow by the subsequent numbers.
To illustrate:
1. Press 0 288888 follow by REDIAL button
2. The telephone will call out 1455 0 288888.