Setting Menu - TTM BIG300 Professional Manual Del Usuario

USER MANUAL - ENGLISH
Thank you for purchasing this new Caller ID phone. To ensure trouble-free operation,
please read these instructions carefully before beginning installation.
1. Installation
Connecting the telephone
▪ Insert 3 AA size batteries in the battery compartment at the base unit bottom.
▪ Connect one end of the handset coil cord into the jack in the handset and insert the other
end into the jack located at the left side of the phone.
▪ Connect one end of the line cord to the telephone line wall socket and the other end to the
backside of the telephone.
Caution:
The telephone line needs to be disconnected prior to opening the battery door!
Keypad illustration
Callback
Upward
One‐touch memory
One‐touch memory
One‐touch memory
Memory store key
Redial/Pause

2. Setting Menu

During the setting mode, press FLASH/SET to enter. LCD shows
when finish each item, press FLASH/SET again to confirm or press DEL to back to
submenu, press to exit.
Review Tel number
Backward
Calculator
Volume/VIP
Delete
Music on hold
Handsfree