Getting To Know Your Phone; 1�1 Your Phone; 1�2 Installing Sim Card And Battery; 1�3 Battery Charging - TTM EASYpocket Manual Del Usuario

1. Getting to know your phone

1.1 Your Phone
1.2 Installing SIM card and battery
(1) Hold on End Key for about three seconds
to switch off the phone�
(2) Remove the battery cover�
(3) Remove the battery�
(4) Follow the sign for SIM1 on the phone to
install SIM1� Please make sure that the golden
contacts of the card face downwards, then push
the card gently until it fixes itself in the card slot�
(5) Insert the battery with its golden contact part
facing the set phone battery contact piece, and
then insert the battery cover�
(6) If the SIM card is not inserted or the contacts
do not work, a warning will appear on the
screen� In this mode, other functions still can
be used
(7) If the SIM card is protected by PIN code, you
must input right PIN code and then press Dial
key� If three consecutive input the wrong PIN
code, the mobile phone SIM card will be locked,
and prompts for admission PUK code
(8) The phone will automatically search for the
network�
• If the phone can connect to a network, you can
see the network name and signal strength on
your screen; If the phone can't find a network,
you can only send emergency calls or other
non-calling functions�
1.3 Battery charging
Charged by the travel charger
(1) Install the battery correctly into the phone�
(2) Insert the lead of the travel charger to
connecting slot of the phone, and then
connect the charger to a standard power
socket�
When charging is complete, unplug the charger
from the micro USB power socket first, and then
11