camry Premium CR 2021 Manual Del Usuario página 4

because water proximity presents risk, even if the device is turned off.
17. Do not allow the device or power adaptor to wet. If the device falls into water,
immediately remove the power plug or power adaptor from the socket. If the device is
powered, do not put hands in the water. Have the device checked by the qualified
electrician before using it again.
18. Do not touch the device or power adaptor with wet hands.
19. The device has to be turned off after every use.
20. In order to provide additional protection, it is recommended to install residue current
device (RCD) in the power circuit, with residual current rating not more than 30 mA. Contact
professional electrician in this matter.
21. If the device utilizes a power adaptor, do not cover it, because this can cause a
dangerous temperature rise and can damage the device. Always connect the power
adaptor cable to the device, and then connect the power adaptor to the power socket.
22. Do not use the Hair dryer in the vicinity of water sources, for example under the
showers, in baths, at the sinks with water.
23. Always unplug hair dryer if You use the appliance in bathroom. The neighborhood of
water is dangerous even if the hair dryer is turned off.
24. Do not immerse the unit in water. In case of falling down into water unplug immediately.
Do not put hands into water if hair dryer is plugged in. Before next use the appliance should
be checked by qualified electrician.
25. Always turn off appliance after using.
26. Do not block air inlet and outlet
27. Do not direct the hot stream to the cord.
28. After use turn off and unplug hair dryer .
29. Do not wrap the cord around the appliance.
30. Hair dryer heat when working. Do not touch hot surface.
31. Never use sharp tool to clean the hair dryer.
32. Be sure that accessories (concentrator, diffusor) are dry, before you attach it to hair
dryer.
33. Never direct hot air toward eyes and other sensitive parts.
PRODUCT DESCRIPTION (pic. 1)
1 - housing
3 - switch On/Off/temperature adjustment
5 - swivel cord
USING THE DEVICE
Hair styling with rotating brush. To rotate brush press one of the rotating brush buttons (6).
1. Attach brush (2) - type as required
2. Plug into socket.
3. Turn on hair styler with switch (3). Adjust required air temperature (C - cool shot, 1 - lower temperature and speed, 2 - higher
temperature)
4. Separate streak of hair, brush out, and start to wind from the end on the brush. Wait few seconds till hot air stream consolidate shape
of winded hairs.
5. Unwind hairs.
6. Turn off hair styler and form required hairstyle with brush or comb.
7. Unplug from the socket.
2 - removable brushes
4 - brush lock button
6 - rotating brush buttons
4