Laica KS3009 Instrucciones Y Garantía página 14

GB
English
DATE, TIME, AND ALARM SETTING
This scale is equipped with calendar (fig. 1), clock function (fig. 2), and alarm clock
function (fig. 3).
Calendar – Date setting (fig. 1):
1) Press the MODE key positioned on the bottom of the scale; the display shows "1M 1D".
2)
start to blink it means that it is possible to set the date.
3) Set the year by pressing " ▼" and "▲
numbers becomes faster. Press the MODE key to confirm the set year.
4) At this point, on the display blinks the message "1M"; set the month by pressing the
keys "▼" and "▲" and confirm by pressing the MODE key.
5) Finally, set the day ("1D") by pressing the keys "
pressing the MODE key.
6) The calendar has now been set; after few seconds, the display shows the time.
While setting the date, if no key is pressed within 10 seconds, the display stops blinking.
Then, repeat the procedure from point 1.
Clock function - Time setting (fig. 2):
1)
start to blink it means that it is possible to set the time.
2) Press the keys " ▼" and "▲" to set the hours and confirm by pressing the MODE
key.
3) At this point, press the keys " ▼" and "▲
pressed, the scrolling of the numbers becomes faster. Press the MODE key to
confirm the set time.
4) It is possible to select the 12/24-hour format. If the 24-hour format is selected (1 to
12 and 1 to 12 p.m.), the display shows the icon "PM" when the indicated time refers
to the afternoon. To select the 12-hour format, keep the key "▲" pressed till the
display shows PM. To display the 24-hour format again, keep the key "▲" pressed
till the "PM" message disappears from the display.
While setting the time, if no key is pressed within 10 seconds, the display stops
blinking. Then, repeat the procedure from point 1.
ELECTRONIC KITCHEN SCALE WITH DATE AND TIME, ALARM CLOCK,
TEMPERATURE AND ROOM HUMIDITY DETECTION FUNCTIONS
Alarm clock function (fig. 3):
By setting the alarm clock function, the scale emits a long acoustic signal (alarm clock)
when the pre-set time is reached.
1) Press the MODE key to select the alarm clock function (fig. 3).
2)
start to blink it means that it is possible to set the alarm clock time.
3) Press the keys "
key. The scale keeps displaying the 12/24-hour format previously selected during
time setting. Should the 12-hour format be selected, the icon "PM" appears when the
indicated time refers to the afternoon.
4) At this point, press the keys "
MODE key to confirm the set time of the alarm clock.
▼" and "▲" and confirm by
After few seconds, the display shows the previously set time (fig. 2).
5) To enable the alarm clock function, press the key "
icon (
disappears from the display (
If during the alarm clock time setting no key is pressed within 1 minute, the numbers on
the display stop blinking and the display shows the previously set time (fig. 2). Then,
repeat the procedure from point 1.
When the alarm clock set time is reached, the scale emits a long acoustic signal. Press
any key to stop it.
Moreover, it is possible to enable the "Snooze" function: When the set time for the
alarm clock is reached, stop the acoustic signal by pressing the "SNZ" key positioned
on the bottom of the scale. After 8 minutes, the scale emits the acoustic signal again.
Press any key among the ones positioned on the bottom of the sale to stop it or press
the key "SNZ" once again to delay the alarm clock by further 8 minutes. During the
SNOOZE function, the icon (
the display.
Caution! The set alarm clock time remains stored. The display shows the bell icon (
on the left side of the display near to the time indication. To disable the alarm clock
function, press the key "▲"; the icon (
the key "▲" once again, the alarm clock function is enabled again for the time already
set.
14
▼" and "▲" to set the hours and confirm by pressing the MODE
▼" and "▲" to set the minutes.
). To disable the alarm clock function, press the key "▲" again; the icon
).
) and the colon between hours and minutes blink on
) disappears from the display. By pressing
▲" once; the display shows the
)