Functions Of The Keys - Emtec Universal EKCOH420 Manual Del Usuario

2) Put in the batteries (always use NEW CR2032 batteries)
. Open the cover on the back of the  in  Universal Remote Control.
. Insert CR03 battery, verify that they are placed correctly with the + on the battery in the same position as
marked inside the battery compartment.

3) Functions of the keys


4
6
8
0

4
[7] Volume +/-: Allows you to control the volume. You can control the volume of your TV even when you are in
VCR, DVD or SAT mode. No need to select the TV mode.
S + Volume +/-: menu navigation keys, allow you to navigate left and right into the menu of your appliances.
[8] Teletext ON: Start/stop Teletext.
S + Teletext ON: Menu ON.
[9] TV, AUX: These keys allow you to select the appliance you wish to control.
[0] INFO: Displays information of the selected appliance.
[11]Teletext OFF: Stop Teletext. S + Teletext OFF: Exit Menu.
[] Numeric keys 0 - 9: Work the same way as your original remote.
[13] -/--: If you are in programming mode – automatic code search- you can confirm the code of the device you
want to control. In connection with the numeric keys, this button allows you with some equipment to select
directly channels higher than 9.
[14] A/V: Selection of an external source (SCART input).
[1] LED indicator: The indicator light flashes when the remote

is operating or lights continuously while you are programming
the remote.
3
[2] S: Allows you to program your remote before the first use.
Allows you also to access secondary functions such as Menu,
5
Exit, etc... Press and release the Shift key, press then the
function key you want.
[3] POWER: Allows you to switch off the last selected
appliance.
[4] Mute: Allows you to turn on/off the sound. You can control
7
the «Mute» function of your TV even when you are in AUX
mode. No need to select the TV mode.
S + Mute: OK key, confirms the selection.
9
[5] Play, FF, Stop, Rew, Pause:

In VCR & DVD mode: These buttons work the same way as in
your original remotes.
In TV mode: Fast text function (coloured keys).
REC (record): This key works the same way as the one on your
original remote for your VCR. In order to avoid a mistake you
have to press this key twice to activate this feature.
[6] PROG +/-:
3
TV, VCR or SAT mode: select the next or the previous channel.
DVD mode: select the next or previous chapter.
S + PROG +/-: menu navigation keys, allow you to navigate up
and down into the menu of your appliances.
3