Introduction; Description; Assembly - Cuisinart DLC3E Instrucciones

1. INTRODUCTION

You have just bought a Cuisinart® Mini-Processor.
This appliance is a quality tool allowing you to realize all kinds of dishes
quickly and easily. It chops, grinds, mashes, emulsifies and mixes your foods
in a few seconds. Its blade has a sharpened edge allowing to chop, mix or
mash, while the thicker edge allows to grind hard foods such as coffee beans
or walnuts. Equipped with a powerful reversible motor, it gets through all the
operations in a few seconds.
2. YOUR APPLIANCE INCLUDES
1. A reversible motor and two very practical pulse operated touch-pad controls.
2. A 0.6-l preparation bowl.
3. A spatula (not illustrated).
4. A lid that can be locked on the bowl. Provided with two openings to pour
liquids during the operation.
5. A blade with professional quality and accuracy. According to its rotation
direction, the blade allows you to chop or to grind foods.
WARNING! THE BLADE IS EXTREMELY SHARP. In order to avoid any risk of
injury when unpacking the appliance, we recommend to handle the blade
with utmost care. Never touch the metal parts and always hold the blade by
its central hub.

3. ASSEMBLY

1. Place the preparation bowl on the motor shaft. Turn it anticlockwise to fix
it on the motor unit.
2. While holding it through its central hub, place delicately the blade on the
central shaft of the preparation bowl. Line up the marks on the blade on
the shaft form. The blade should be perfectly fitted and in the bottom of
the preparation bowl.
3. Place the ingredients in the bowl.
4. Place the lid on the bowl. The lid tongue should be oriented to the right of
the back column. Turn the lid anticlockwise to lock it.
N.B. The appliance starts only if the lid is correctly locked. It stops instantly
when the lid is removed.
5. Connect the appliance. It is now ready to start.
Lid (4)
Blade (5)
Preparation bowl (2)
Shaft
Reversible
motor (1)
Cord wrap
9