TECshow STRATUS FAZER Manual De Usuario página 11

You need to know that DMX address settings are
the sum of the dip switch values. A standard DMX
address for a TecShow fazer, which has 1 channel is
as follow:
Example
Stratus fazer Address Value DMX Dip Switches "ON"
Unit 5 5
Switch Value
#1 1
#3 4+
Total sum 5
Explanation: Since each unit has 1 channel, each
address advances 1 value (See Address Value
#1 ,
#3
above). Once address values are determined, add
DMX dip switch values to obtain the appropriate
address (DMX Dip Switches "ON") for each unit. Flip
appropriate DMX dip switches on each unit.
Example:
1. If you want to give a Stratus fazer DMX address
133, you first have to find the number 133 in the
DMX Chart.
2. Then look at the left side (Dip Switches #1-#5)
horizontally from 133. In the Table you'll see
#1=ON, #2=OFF, #3=ON, #4=OFF, #5=OFF.
3. Finally look at the upper side of the table (Dip
Switches #6-#9) vertically from 133. In the Table
you'll see #6=OFF, #7=OFF, #8=ON, #9=OFF.
P. 11
English version | Tecshow Stratus Fazer