Temperature Mode; Night Light Function - Denver SC-16 Manual Del Usuario

ENGLISH

Temperature Mode

Press Main Menu button to display the main menu.
Press LEFT/RIGHT button to seclect Temperature mode.
press UP/DOWN button to select centigrate or Fahrenheit
press Main Menu key to Exit.
Pan and Tilt
You can use UP/DOWN/LEFT/RIGHT navigation key on the monitor to remote control the
camera.
LCD ON/OFF
Press LCD ON/OFF KEY TO turn on/turn off the LCD.
Talk back
Press and hold the talk back key to talk back to your baby.
VOX Function
If can not detect any noice in baby room, VOX funtion will turn on automaticly, it means the
LCD turns off to save the monitor battery. If you want to see your baby ,you can press the LCD
ON/OFF key to turn on it . If no need to see your baby sleeping status, later the LCD will turn on
automaticly when the camera detect the voice in baby room.

Night light Function

In dark room or in the week light room, Night light Funciton will turn on automaticly. Same
time, you can see the moon icon on the monitor .
No Signal
If the monitor does not receive the signal from baby camera from your baby room, you will hear
the PEPE tone for alarm. It means the camera is not working .so please check the battery of
camera and check if the camera turns on .
TV OUT
Please use AV cable to connect TV and monitor(parent unit), so you can see the video on the
TV,at this moment , you can not see and hear on the monitor(parent unit),but you can still set
up on the monitor(parent unit)
ENG 6