Technical Data; Defi Nitions: Safety Guidelines - DeWalt D21716 Traducido De Las Instrucciones Originales

PERCUSSION DRILL
D21716, D21717
Congratulations!
You have chosen a D WALT Power Tool. Years of
E
experience, thorough product development and
innovation make D WALT one of the most reliable
E
partners for professional Power Tool users.

Technical Data

Voltage V
(U.K. & Ireland only) V
Type
Power input W
No-load speed min -1
No load impact min -1
Maximum drilling range in
steel/wood/concrete mm
Chuck spindle
thread size UNF
Collar diameter mm
Maximum chuck
capacity mm
Weight kg
L (sound pressure) dB(A)
PA
K (sound pressure
PA
uncertainty K) dB(A)
L (sound power) dB(A)
WA
K (sound power
WA
uncertainty K) dB(A)
Vibration total values (triax vector sum) determined
according to EN 60745:
Vibration emission value a
h
Hammerdrilling:
a = m/s²
h,ID
Uncertainty K = m/s²
Vibration emission value a
h
Drilling into Metal:
a = m/s²
h,D
Uncertainty K = m/s²
Vibration emission value a
h
Screwdriving:
a = m/s²
h
Uncertainty K = m/s²
The vibration emission level given in this information
sheet has been measured in accordance with a
standardised test given in EN 60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
D21716
D21717
230
230/115
2
701
0 - 2,600
0 - 44,200
13/30/16
1/2" x 20
43
13
1.9
Fuses:
95
Europe
3.1
U.K. & Ireland
106
U.K. & Ireland
3.1
Defi nitions: Safety Guidelines
The definitions below describe the level of severity for
each signal word. Please read the manual and pay
attention to these symbols.
22.9
2.9
2.8
1.5
< 2.5
1.5
E N G L I S H
WARNING: The declared vibration
emission level represents the main
applications of the tool. However if the
tool is used for different applications,
with different accessories or poorly
maintained, the vibration emission may
differ. This may significantly increase the
exposure level over the total working
period.
An estimation of the level of exposure to
vibration should also take into account
the times when the tool is switched off or
when it is running but not actually doing
the job. This may significantly reduce
the exposure level over the total working
period.
Identify additional safety measures to
protect the operator from the effects of
vibration such as: maintain the tool and
the accessories, keep the hands warm,
organisation of work patterns.
230 V tools 10 Amperes, mains
230 V tools 13 Amperes, in plugss
115 V tools 16 Amperes, mains
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not avoided,
may result in minor or moderate
injury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
21