Instructions For Use; Lighting Instructions; Tending The Fire; Extinguishing The Fire - Pit Boss PB21FP Manual De Instrucciones

LIGHTING INSTRUCTIONS

1. Start by filling the Burner of your Fire Pit with hardwood pellets. Wood chips, wood chunk, or
firewood logs can also be used, but best results are using hardwood pellets.
WARNING: Do not fill past the fill-line indicator holes, as this will block
airflow for the secondary burn (flame).
2. Insert lighter gel, liquid fire starter, or apply lighter-fluid to multiple areas of the fuel.
3. Use either a long handled lighter or match to light firestarter in several locations.
WARNING: Do not use charcoal, spirit, petrol, gasoline or kerosene for
lighting your Fire Pit. This could cause serious injury.
4. Fire will quickly build in the Burner, ready for enjoyment.

TENDING THE FIRE

Should the fire begin to deminish, or to extend your burn time, periodically add more fuel into the
Burner while the fire is still burning. Add a small handful of fuel can be added to one side of the
Burner. If using wood pellets as fuel, add small quantities at a time. Excessive amounts of wood
pellets added at one time could lead to smothering of fire and excessive smoke.
CAUTION: During use, this unit can reach extreme temperatures that can
cause serious injury. It is recommended to use a heat-resistant barbecue
mitts or gloves when adding fuel to avoid injury.

EXTINGUISHING THE FIRE

To extinguish the fire, allow all fuel to burn out.
CAUTION: Do not use water to put out the Fire Pit. This can be harmful to the
structure of the Fire Pit and heavily decrease its lifetime.

TRAVEL AND STORAGE

The Fire Pit can quicky and easily be relocated for enjoyment or travel.
IMPORTANT: Always ensure the Fire Pit is completely cooled before moving.
Ensure the ash in the bottom of the unit is also removed.
1. Lift the Wind Break and flip upside-down. Replace onto top of unit.
2. Using two people, carefully lift the Fire Pit and move to desired location.

INSTRUCTIONS FOR USE

7