Sears Kenmore 110.22532512 Manual De Uso Y Cuidado página 9

7.
Select WASH TEMP
Select the Wash Temp by turning knob to desired temperature.
All rinses are tap cold.
NOTE: Always read and follow fabric care label instructions
to avoid damage to your garments.
Wash Temp
Hot
Some cold water is added
to save energy. This may be
cooler than your hot water
heater setting.
Warm
Some cold water may be
added, so this will be cooler
than what your previous washer
provided.
Cool Lights
Warm water is added to assist
in soil removal and to help
dissolve detergents. Cool is
slightly warmer than cold.
Cool Darks
Warm water is added to assist
in soil removal and to help
dissolve detergents. Cool is
slightly warmer than cold.
Cold
Warm water may be added
to assist in soil removal and
to help dissolve detergents.
8.
Select FABRIC SOFTENER option
On models with a separate Fabric Softener knob, this option
must be set to "Yes" when using the fabric softener dispenser.
This ensures that fabric softener is added at the correct time
in the rinse for even distribution.
Suggested Fabrics
Whites and pastels
Durable garments
Heavy soils
Bright colors
Moderate to light soils
Colors that bleed or fade
Light soils
Dark colors that bleed or fade
Light soils
Dark colors that bleed or fade
Light soils
9.
Select WATER LEVEL
Set the Water Level knob to the Auto setting and the washer will
automatically sense the appropriate water level for the load size
and type.
Set the Water Level knob to the Deep Fill setting and the washer
will fill to the maximum water level.
NOTES:
The cycle will be longer due to extended fill times when using the
Deep Fill setting.
Deep Fill is not available in the Normal cycle mode. Selecting
the Normal cycle with the Deep Fill setting will result in auto
sensing of the water level.
10.
Press START/PAUSE/Unlock lid to begin
wash cycle
Press the START/PAUSE/Unlock lid button to start the wash
cycle. When the cycle has finished, the Complete status light
will light. Promptly remove garments after cycle has completed
to avoid odor, reduce wrinkling, and avoid rusting of metal
hooks, zippers, and snaps.
Unlocking the lid to add garments
If you need to add 1 or 2 missed garments after the wash
has started, simply open the lid and this will pause the cycle.
After adding the garments, simply close the lid and the cycle
will resume.
If, instead, you press the Start/Pause/Unlock Lid button
to pause the cycle and then open the lid to add garments,
you will need to press the Start/Pause/Unlock Lid button after
closing the lid to resume the cycle.
NOTE: Washer will not fill with the lid open.
IMPORTANT: If lid is left open for more than 10 minutes,
the water will pump out automatically.
Manual soak
If you would like to manually soak your garments at any time
during the wash portion of the cycle, press START/PAUSE/
Unlock Lid and leave the lid closed. Once your desired soak
time has elapsed, press START/PAUSE/Unlock lid again
to continue the cycle. As long as the lid remains closed, your
soak time can be longer than 10 minutes. However, if the lid
is opened during the soak and remains open for more than
10 minutes, the water will pump out automatically.
9