Kohler K-123L36-SANL-CP Guia De Instalacion página 5

2. Install Tubing (Recommended)
NOTE: Tubing (not provided) can be attached to the mounting
bracket to route the cables and the spout tube to the control box.
PVC fittings (not provided) are recommended.
NOTE: Consult the specification sheet to determine the control box
installation location.
Connect a 90 degree elbow and a straight tube to the mounting
bracket as shown. Make sure the tube is long enough to reach the
control box.
Connect another elbow to the end of the tube at the control box
installation location.
Install the plaster guard with the screw.
Kohler Co. 5 1386433-2-A