V-TAC VT-5129 Manual Del Usuario página 8

PARAMETERS OF THE WIRELESS SWITCH
Product Size
Switch times
Sensitivity
Package weight
Emission current
Working temperature
Working characteristics No need wiring Fireproof PC
Remote distance
Remote distance
RECEIVER INSTALLATION
By Screws: Fit the receiver by KA3.5x25 screws on applicable place.
By 3M tapes: S�ck the double-side tape on the plain surface of the receiver, then s�ck the
receiver to the applicabe place.
WARNING!
1. Please switch off the power before star�ng the installa�on.
2. Installa�on must be performed by a cer�fied electrician / person.
Red, Blue input wires connect to AC220V
to AC110V power supply. Brown, Blue
Output wires connect to lamps.
86*86*11MM
Type
86*86*13MM
>600,000 times Working frequency
-116dB Working voltage
82~86g Life of the ba�ery
< 30 mA
Standby current
-40~+70°C Waterproof
>600m outdoor Light on the switch
Interchangeable
>40m indoor
panel
ENGLISH
1-gang, 2gang,
3-gang
433.932 MHz +/-75KHz
3V (CR2032)
> 300,000 times
< 0.01 uA
IP54
CHIMEI
Blue light
The three kinds of panels
can be interchangeable
FIGURE 15