Dialing Mode; Regional Area Codes - GE 29893 Guia Del Usuario

2. Use NEXT or PREVIOUS to select the first digit.
3. Once the first digit is set, press ENTER.
4. Repeat steps 2-3 until all the digits of the security
code are set.
5. When finished, press ENTER to confirm. The unit beeps.
NOTE: To skip to the next setting, press MENU. To
exit setup, press PLAY/STOP.
TIP: You can use the keypad to enter all the digits in one
step. To enter 456, press 4,5, and 6. Then press ENTER.
D M
IALING ODE
This adjustment allows you to select tone (touch-tone)
or pulse (rotary) mode dialing. The phone is
automatically set for touch-tone use.
1. If you just adjusted the Remote Access menu, skip to step
2. If you haven't adjusted any other setting, press and
release the MENU button until DIALING is displayed.
2. Use NEXT or PREVIOUS or press the keypad number
for the desired setting (1 for pulse, 2 for tone).
3. When finished, press ENTER to confirm. The unit beeps.
NOTE: To skip to the next setting, press MENU. To
exit setup, press PLAY/STOP.
R A
EGIONAL
Depending on your area, you may need to set regional
area codes. These are needed in order for the phone to
determine the number format to be displayed when a
valid Caller ID signal is received. Calls received that
match any of the regional area codes are displayed as 10
digits. If the number is not displayed correctly, the
phone may not be able to dial back the number
properly. You can store up to 6 regional area codes.
C
REA ODES
ENTER button
MENU button
N
ERASE
MEM DIAL STORE
1
A
QUICK DIAL
4
B
GHI
7
PQ
C
RS
MEM DIAL
*
TONE
PREVIOUS button
PLAY/STOP
button
O
VOL +
ON/OFF
VOL -
FLASH
2 3
ABC DEF
REDIAL/PAUSE
5 6
JKL MNO
HOLD
8 9
WX
TUV
YZ
#
0
OPER SPEAKER
mic
NEXT button
13