Moving The Answering System; Telephone Set Up - GE 29893 Guia Del Usuario

M
OVING THE
1. Disconnect the phone line from the modular telephone (wall) jack.
2. Unplug the power supply from the electrical outlet.
3. Move the unit and line cords to the desired location.
4. Connect the power supply to an electrical (AC) outlet. The display shows that the
messages have not been erased.
5. Connect the phone line.
6. Reset the time/date settings or wait for the next call to set them automatically.
T
ELEPHONE
You can customize the following settings to suit
your needs.
Display Contrast
Time/Date
Local Area Code
Message Length
Rings to Answer
Remote Access
Dialing
Regional Area Codes
8
A
NSWERING
S U
ET P
Selects the display
contrast.
Sets the time and date.
Sets your local area code
for Dial Back.
Sets the length of time
allowed for
incoming messages.
Selects the number of
rings before the unit
answers.
Sets your 3-digit code
used for remote access
to the unit.
Sets the phone for tone
or pulse dialing.
Sets your regional area
codes if you have
multiple area codes
where you live.
S
YSTEM
Display Contrast
Time/Date
Local Area Code
Message Length
Rings to Answer
Security Code
Dialing
Regional Area Codes – – –
Default Settings
3
12 a.m. 1/01
– – –
2 minutes
4
123
Tone