Cleaning And Maintenance - cecotec FAST&FURIOUS 4050 X-TREME Manual De Instrucciones

ENGLISH
Press on the steam trigger until steam is produced to check the device has preheated correctly.
To generate steam, press down on the steam trigger with your index finger. (G)
As long as the trigger is held down, steam will emit from the garment steamer. To stop the
continuous steam function, release the trigger.
To generate a constant flow of steam without holding the trigger, press the steam trigger and
then slide the continuous steam slide button down. (H)
To turn the continuous steam function off, press the trigger, slide the continuous steam slide
button up and then release the trigger.
Fig. 6.
When ironing using a heatproof vertical pad or surface, start steaming and then lightly press
the metal plate against the garment on the ironing pad or surface. (M) Drag the plate up and
down the fabric, being careful to keep hands away from the steam and never leaving the plate
in one section for too long. Use it similarly to how an iron is used.
Safety system
This device features a safety system that avoids incidents from occurring as the iron is
disconnected in case of overheating.
Steam cleaning at home
The device can also be used to clean household items resistant to heat. Damp steam cleaning
is not harmful or toxic, plus it is inexpensive. This natural cleaning method is beneficial to
those sensitive to chemical cleaners or trying to reduce chemicals at home. It can be used to
steam upholstery, draperies, linens and home textiles for a complete cleaning.
Tips
Always test garments by steaming a small hidden area to make sure the garment operates
properly and is ready to use.
Always read garment care label instructions before ironing or steaming clothes and other
garments.
Small amounts of dripping might occur during use. If excessive, the garment steamer may
need time to get back up to full temperature. Allow the garment steamer to reheat.
Wearing clothes immediately after ironing or steaming can actually create creases. Always
allow clothing to cool for about 5 minutes after ironing or steaming before wearing it.

4. CLEANING AND MAINTENANCE

When you have finished using the device, ensure it is thoroughly dried. Turn it back on and
lightly steam over an old cloth. This will help remove any residue left in the steam holes.
When finished cleaning, turn the garment steamer off by pressing the power button until the
33
FAST&FURIOUS 4050 X-TREME