Samson Airline 77 AX1 Manual Del Usuario página 13

Setting Up and Using Your AirLine System
10. Speak or sing into your mic at a normal performance level while slowly raising the volume of your amplifier and/or mixer until the
desired level is reached. Note that Unidirectional microphones (mics which pick up signal from just one direction) such as the built-in electret
condenser are less prone to feedback than other types of mics. Any feedback problems you encounter can be mini-mized
by being sure not to use the microphone directly in front of a PA speaker or by using an equalizer to attenuate (reduce) those high- or
mid-range frequencies which are causing the feedback "squealing".
11. If you hear distortion at the desired volume level, first check to see whether the "Peak" LED on the receiver is lit. If it is not lit, make sure
that the gain structure of your audio system is correctly set (consult the owners manual of your mixer and/or amplifier for details). If the red
"Peak" LED is lit, do the following:
• If you are using an AX1 transmitter, use the supplied plastic screwdriver to turn its Microphone Input Level control (trimpot) slowly
counterclockwise (towards the "Min" position) until the distortion disappears.
• If you are using an transmitter
mouth. If you are using an with
(trimpot) slowly counterclockwise until the distortion disappears.
12. Conversely, if you hear a weak, noisy signal at the desired volume level, again make sure that the gain structure of your audio system is
correctly set (consult the owners manual of your mixer and/or amplifier for details) and that the Volume control of the receiver is fully clock-
wise. If it is lit and the signal coming from the receiver is still weak and/or noisy, do the following:
• If you are using an AX1 transmitter, use the supplied plastic screwdriver to turn its Microphone Input Level control (trimpot) slowly
clockwise (towards the "Max" position) until the signal reaches an acceptable level.
• If you are using an transmitter
mouth. If you are using an with
(trimpot) slowly clockwise until the signal reaches an acceptable level.
with its internal electret condenser microphone, simply move the microphone further from your
an external lavalier microphone, use the supplied plastic screwdriver to turn the Gain control
with its internal electret condenser microphone, simply position the microphone closer to your
an external lavalier microphone, use the supplied plastic screwdriver to turn the Gain control
13
Samson AirLine