Material Resistance; Disposal - Beurer IH25 Instrucciones Para El Uso

Note:
In water or steam, the PVC component
lose their transparency. This will go away
by itself after a few days in a dry atmos-
phere and does not affect the suitability
for use. All accessories can be sterilised
up to a maximum of 100 times, after
which they must be replaced.
Drying
Place the individual components on a
dry, clean and absorbent surface and
allow to dry completely (for at least 4
hours).

Material resistance

Do not expose the nebuliser and acces-
sories to temperatures above 130°C.
Just as all plastic components, a nebu-
liser is generally a wearing part. The at-
omiser can be sterilised up to a maxi-
mum of 100 times, after which it must
be replaced.
9

Disposal

In the interest of environmental protection, do
not dispose of the device in household
waste.
Please dispose of the device in
accordance with EU directive
2002/96/EC –– WEEE (Waste
Electrical and Electronic Equip-
ment).
If the atomiser is sterilised less than 100
times, we recommend that it should be
replaced at the latest after one year.
For intensive use (more than 3 x daily),
we recommend that the atomiser is re-
placed every 6 months to ensure con-
sistently effective nebulisation.
When choosing a cleaning or disinfect-
ing agent, note the following:
Only use mild cleaning or disinfectant
agents in the quantities recommended
by the manufacturer.
Storage
Do not store the nebuliser in a damp at-
mosphere (e.g. in the bathroom) or trans-
port it together with damp objects.
Store and transport the nebuliser away
from direct sunlight.
Storage
The device and all accessories, e.g. the
nebuliser and masks, can be stored to-
gether in the storage bag provided.
If you have any questions, please contact
the local authorities responsible for waste
disposal.
28