Removing Infant Car Seat; Folding Stroller With Icsa Attached - BOB CS1401 Manual De Instrucciones

1. Fasten Restraint Belt
Fasten restraint belt over Infant Car
Seat securely.
2. Adjust Restraint Belt
Pull on Red Ring to tension Restraint
Belt.
REMOVING INFANT CAR
SEAT FROM STROLLER
Care must be taken when
folding and unfolding the
stroller to prevent finger
entrapment or injury.
NOTE: Refer to Infant Car Seat user guide
for specific instructions.
FOLDING STROLLER WITH
ICSA ATTACHED
Care must be taken when
folding and unfolding the
stroller to prevent finger
entrapment or injury.
To avoid injuries, never fold
or unfold stroller with other
individuals within reach of
stroller.
1. Set Parking Brake
Set parking brake (see stroller owner' s
manual if necessary).
2. Unfasten Restraint Belt
Unfasten buckle, place Restraint Belt ends
to sides of stroller seat.
3. Remove Infant Car Seat
Remove Infant Car Seat from ICSA.
4. Empty Stroller
Remove contents from low boy cargo
basket and pockets.
5. Fold Handlebar
Squeeze both handlebar release levers
simultaneously (see stroller owner' s
manual if necessary).
6. Rotate Handlebar Forward
Slightly rotate handlebar towards seat and
hold in place during next step.
7. Lift Red Frame Release Handle
Using a short, quick tug, lift red frame
release handle up. Keep tires on ground
as stroller collapses toward front wheel
(see stroller owner' s manual if necessary).
14
P636900A