English; Technical Data - Roto ZAR M 6 Serie Manual Del Usuario

English

CE conformity
The product has a CE mark.
Name: WAREMA Sonnenschutztechnik GmbH
Year of Declaration of Conformity: 2006
Address: Ostring 6
09212 Limbach-Oberfrohna
Standard: DIN EN 13561
Product: External roller blind
Intended use:
For external installation on skylights
1
Wind class: 0
General safety instructions
• These installation instructions are intended for
trained personnel.
• The fitter of the product is expected to have skills in
the following areas:
• Compliance with accident prevention regulations
• Working correctly with ladders/climbing
equipment
• Attaching fixing materials
• Evaluating the building fabric
• Product operation and commissioning
• If the fitter does not possess one or more of these
qualifications, the work must be carried out by a
specialist fitting company.
• Read this manual carefully before installing and op-
erating the device.
• Heed all installation steps, instructions and notes.
• Ensure that this manual is accessible to all users.
• Keep this manual in a safe place until you dispose of
the product.
• If the product changes hands, pass this manual on to
the new owner.

Technical data

• The dimensions depend on the type and size of the
window.
Intended use
The external roller blind is intended for external use on
skylights and protects against heat.
It may only be installed on the Roto skylight type de-
signed for its use.
1.The test conditions specified by DIN EN 1932 are not optimally suited for this product.
The external roller blind withstands wind speeds up to 7.4 m/s.
10
The external roller blind reflects and absorbs a large
portion of heat radiation, but does not offer full heat
protection (in a physical sense).
Do not place additional strain, such as that from sus-
pended objects, on the external roller blind as this may
damage the product.
No alterations, additions, conversions or maintenance
work other than the activities described here are to be
carried out on the product without the written approval
of Roto.
Unpacking/checking the scope of delivery
(Fig. A1-A2)
⚠
Risk of suffocation!
Plastic parts, polystyrene, screws, small
parts, etc., can be very dangerous for chil-
dren to play with.
> Do not leave the packaging material and installa-
tion parts lying around, and keep away from
children and toddlers.
> Keep children away from the installation site
throughout the installation procedure.
⚠
Risk of injury and property damage from
damaged external roller blind!
> Before installing, check the external roller blind to
ensure it is in technically perfect condition. Install
the product only if it is in technically perfect con-
dition.
• Dispose of the packaging material as required by
local regulations.
• Check the scope of delivery. If parts are missing, con-
sult the specialist dealer.
Preparing tools/aids
(Fig. A3)
• Cross-head screwdriver
• Hex key (SW 5)
• If needed: stable climbing equipment (step ladder)