Tabla de contenido
Publicidad
Quick Start Guide
Inserting Batteries
1.
Remove the battery compartment from the main housing.
2.
Place 2 x AA batteries into the available slots. Ensure batteries are placed the
correct way around. See inside battery compartment for guide.
3.
Replace the battery compartment cover.
Power On/Off
1.
Slide the Power On/Off button towards the front of the unit to switch on.
2.
The display will turn on to indicator power.
3.
To turn the XMTRS off slide the Power On/Off button towards the screen.
Selecting and Setting Functions and Values
The following is a guide to the XMTR operations:
TTL / Flash (manual) Mode
BUTTON
ACTION
CHN / SET
Single Press
Double Press
Press and Hold
GRP / SELECT
Single Press
Double Press
Press and Hold
MDE
Single Press
MDE
Press and Hold
Strobe Mode (NIKON & SONY)
BUTTON
ACTION
CHN / SET
Single Press
Double Press
Press and Hold
GRP / SELECT
Single Press
Double Press
Press and Hold
MDE
Single Press
FUNCTIONS
Select Channel (when in normal operation).
Confirm (when in user settings).
Turn modelling on/off.
Enter user settings.
Select group. Additional press selects the group to the right.
Select group to the left.
Select all groups.
Select flash mode (Flash, TTL, Off) when group selected.
Enable / Disable Strobe mode (Canon only - for Nikon and Sony
cameras, Strobe mode is enabled / disabled via the user settings).
FUNCTIONS
Select Channel (when in normal operation).
Confirm (when in user settings).
Turn modelling on/off.
Enter user settings.
Select group. Additional press selects the group to the right.
Select group to the left.
Select all groups.
Select Strobe settings.
7
Publicidad
Tabla de contenido
