NOTE: The faucet (A) and lift rod (M) are not included with the product.
Installation (continued)
4
Installing the stopper and
horizontal rod
□
Before installation, unscrew the protective
cap (1) from the horizontal rod (J).
□
Insert the stopper (D) into the drain hole in
the sink.
□
Insert the horizontal rod (J) into the drain
body (H) and through the hole of the stopper (D)
until you hear a click. See insert 2. You can
press the two sides of the joint (I) to remove the
horizontal rod (J).
NOTE: For easier removal and cleaning, rotate the stopper
(D) 90 degrees so that the horizontal rod (J) does not go
through the hole in the stopper (D). See insert 3.
1
Insert 3
H
D
2
J
H
Insert 2
J
I
I
5
Installing the lift rod
□
Insert the lift rod (M) through the faucet (A) and
down into the lift rod strap (K). Tighten the
thumb screw (N).
M
A
M
2
K
2
1
M
K
N