Hach LZY904.98.00002 Instrucciones Para El Usuario página 8

9. When the status
indicator light flashes
green, remove the
calibration lid.
13. Push the button on
the front of the
instrument to save the
calibration value. The
status indicator light
stays green.
8 English
10. Remove the vial.
14. Examine the
calibration data on the
controller menu or the
Claros user interface.
11. Make sure that
there is no water on the
process head (or the
automatic cleaning
module). Dry all
possible spills to
prevent water ingress
on the vial
compartment.
12. Hold the process
head (or automatic
cleaning module)
vertically when it is
installed on the
instrument or the vial
can break.