ACM Blidoor Multibox Manual De Instrucciones página 5

WALL ALUMINIUM SELECTOR WITH ELECTROBRAKE RELASING,
WARNING:
INCORRECT INSTALLATION OF THE DEVICE
CAN CAUSE SERIOUS INJURY;
PAY CLOSE ATTENTION TO ALL IINSTALLATION
INSTRUCTIONS
PREPARATION :
Prepare the electrical wire and release cable outlet from the wall, respecting the preset spaces on
the switch box (fig. 1)
.
PUSH BOTTON:
• remove the cover on the control button by unscrewing the two attachment screws and open
the predisposed conduits to pass the cables (fig.2)
• insert the control panel inside the safety housing as demon strated in fig.3 and attach it with
the two screws contained in the kit
• hook up the electrical connection as shown in fig. 3; attach the ground terminal to the alu
minium pin
fig. 2
MULTIBOX
PUSH BUTTON AND SAFETY LOCK
fig. 1
fig. 3
5