Warning Symbols; General Safety Instructions; Specific Safety Rules - Inspire R44001-XY-1L Manual Del Usuario

EN

1. Warning symbols

0.5 m

2. General Safety Instructions

WARNING: When using electrical appliance, basic safety precautions should always be followed
to reduce the risk of fire, electrical shock and personal injury.
• General
•
Check if the electrical specifications of the appliance are compatible with your installation.
•
Unauthorized use or technical modification to the appliance can lead to danger to life and
health.
•
This appliance is not intended for use by persons ( including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
•
This appliance is for indoor use only except moist or wet room.
•
Means for disconnection must be incorporated in the fixed wiring in accordance with wiring
rules into force.
•
Before pushing the reversible slide switch, it is necessary to stop the action of the blades by
turning off the fan.
•
The supplier disclaims all liability for personal injury or property damage arising from
incorrect use or installation of the fan. In doubt, call upon an electrician.
•
Children should be supervised to ensure that they do not play with the appliance.
• Electrical Safety
•
The lighting product should be installed by an authorized electrician in accordance to
national wiring rules.
•
An all-pole disconnector with isolating distance of 3mm must be incorporated in the fixed
wiring in accordance with the national wiring rules.
•
This lighting product is in accordance with safety standards into force. Repairs should be
exclusively performed by qualified technicians using original spare parts. Any breach of this
instruction may be particularly dangerous for the users.
3. Specific Safety Rules
31
Read the instructions
Caution
Lamp
Minimal distance from lighted objects should be 0.5 meters
•
The fan base mounting bracket can support a load of 33.5 kgs.
•
The fan is to installed so that the blades are more than 2.3m above
the floor.