Raider RD-CS22 Manual Del Usuario página 15

2. Keep the tool do the work area clean.
Clutter operate the site increases the risk of accidents;
3. Be aware to operate the site conditions
Do not leave the tool to rain. Do not use the tool in damp or wet environment. Work saw is good
lighting. Do not use the tool near flammable liquids or gases;
4. Protective hair against electric shock
Avoid contact with the body grounded surfaces (eg pipes, radiators, ovens, refrigerators);
5. Do not allow children away
Do not allow outsiders to contact tool or cord; Hold them off operate the place.
6. Keep unused tool in place
Keep the tool when not in use at the moment, locked in a dry, which can be accessed by children;
7. Do not overload the tool
He will do the tool do the work better and safer in the range indicated by the manufacturer;
8. Use the right tool
Do not try to force small tools or attachments to do the job of a great and powerful tool. Do not use
tools for specific activities (eg: Do not use a circular saw cuts on branches or trunks);
9. Work with correct operate the clothing
Do not wear loose clothing or jewelry, they can be caught in moving machine parts are. When
grinding outdoors is recommended to wear protective hair rubber gloves and shoes with stable tread.
If you have long hair, wear protective hair covering;
10. Use safety glasses
Furthermore, use breathing mask or if cuts is associated with release of suction;
11. Use dust collectors
If the equipment can be placed for extract and sabipane of suction, and assure their place ppavilno
use;
12. Grounding-power cord.
Never Hold tool power cord, never pull cord to disconnect the power cord, cable and protective hair
from oil and heated to dopip objects and sharp edges;
13. Securing the workpiece
Use clamps or a vise to lock the workpiece, it is safer than if you are holding it by hand, but you
can use both hands on the saw for grinding tool;
14. Do not stretch to reach objects beyond your
the given tool may cause hazardous situation;
15. Giving the tool repaired only by a qualified person
This tool is towards the relevant rules of labor safety. Permitted repairs carried out only by a
qualified pepsonal using original spare parts, otherwise working for a significant risk of accident.
15