HP COMPAQ PRESARIO X1220EA Manual De Instrucciones página 4

To use a wireless LAN connection:
1. Verify that all drivers required by the WLAN adapter are installed and that
the WLAN adapter is correctly configured.
If you are using an integrated WLAN adapter, all required drivers are
installed and the adapter is preconfigured and ready for use.
2. If you are using an integrated WLAN adapter, verify that the WLAN adapter
is enabled. When the WLAN adapter is enabled, the wireless device light is
on. If the wireless device light is off, press the wireless device button to
enable the WLAN adapter.
3. Verify that your access point is correctly configured. For instructions,
refer to your access point documentation.
4. When you are setting up a WLAN connection for the first time, place your
notebook very near a compatible WLAN access point (or a compatible
wireless-equipped computer). Functional range for subsequent WLAN
connections will vary, depending on your notebook's WLAN
implementation and any interference from varying types of walls and other
electronic devices.
5. To configure your wireless network connection using Windows XP,
follow the instructions available at Start > Help and Support.
For more information about using a WLAN connection:
Access the information and Web site links provided at Start >
Help and Support.
Refer to the documentation included with your notebook. The
Troubleshooting guide on the Documentation Library CD contains a
"Wireless LAN (WLAN) Device Problems" section.
Refer to the documentation included with your supplementary networking
devices and services.
To identify the wireless device light and button on your
notebook, look on your notebook for the button and light
identified with the wireless symbol illustrated here, or refer
to your model-specific documentation.
2