Proline STCM15P Manual De Instrucciones página 7

Switch off the coffee maker and allow 5 minutes to cool before refilling
with cold water.
MAKING DRIP COFFEE
1. Place the appliance on dry, level and heat‐resistant surface, away from
any edge.
2. Open the cover.
3. Fill the water tank with the required amount of fresh, cold water using
the water level indicator as a guide.
 The markings on the water tank window and carafe indicate level of
water required to brew the desired number of cups.
 To avoid overflow, do not fill the water tank with water past the
12‐cup line.
4. Place the mesh filter into the filter holder, making sure it is assembled
correctly.
5. Place a 1X4 filter paper (not supplied) into the mesh filter.
6. Add the desired ground coffee in the paper filter by spreading it evenly.
 It is recommended to use a level spoon of ground coffee
(approximately 6g) for every cup of coffee.
7. Close the cover.
8. Slide the carafe into the appliance ensuring it sits correctly on the
warming plate.
9. Plug the coffee maker into the mains socket.
 The numbers "00 00" will flash on the display.
EN-6