Denver DAB-10 Manual De Instrucciones página 2

English
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE ANY
COVER. NO USER-SERVICEABLE PARTS INSIDE, REFER ANY SERVICING TO
QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS
• Read and keep these instructions available for future reference.
• For indoor use only
• To reduce the risk of fire or electrical shock, do not expose this unit to
rain or moisture.
• The apparatus should not be exposed to dripping or splashing.
• No objects filled with liquids, such as vases, shall be placed on the
apparatus.
• Take care that foreign objects do not enter, or liquids are not spilled,
into the case
through any openings. If this should happen, refer to qualified service
personnel before attempting to use.
• Do not install near any heat source, such as radiators, or other
equipment that produces heat.
To clean the DAB-10 radio, wipe the case with a slightly moist, lint-free cloth.
Do not use any cleaning fluids containing alcohol, ammonia or abrasives.
Do not spray an aerosol at or near the radio. Always use original packaging if
it is necessary to transport the unit at any time. If this unit is used in a dusty
environment, it may be necessary to have the unit serviced at your local
dealer periodically. It is not advisable to allow large deposits of dust to
accumulate within the unit as it may prevent adequate cooling. Similarly dust
deposits, which become damp, can sometimes lead to electrical problems,
which may cause severe damage to the delicate electronics within this unit.
ENG 1
Location of Controls
LCD Display
1.
2. Standby/ Select
3. Menu/ Info
FM Transmission
4.
Backward
5.
Forward
6.
Antenna jack
7.
Audio out jack
8.
Audio in jack
9.
DC jack
10.
Installation
Assemble the cradle
1.
Assemble the cradle by hooking up the unit into the holder.
2. Secure the DAB-10 unit into the cradle
3. Connect the supplied USB cable to the DC jack located on the side
panel of DAB-10 and the USB jacks on the cigarette-lighter power plug.
Please refer to the section on LOCATIONS OF CONTROL for the side
view of the adaptor.
ENG 2