Control Panel - Orima OR12-290 Libro De Instrucciones

How to empty the water tank :
1, Grasp the bulge of the water tank, and take out the tank.
2, Pour the water so that the tank can be empty.

5.2 Control Panel

Power Button
Press this button to turn on the machine and the indicator light of power button will be on ( Orange color). The
machine will enter Automatic mode automatically ,which is default mode and the default setting humidity
data is 60%RH
Press this button againt to turn off the machine and the indicator light of powe button will be off
Timing button
Press this button to timing the machine when to turn on or turn off automatically for 1~24 hours. You can
timing the machine when to turn on automatically under stand- by status and timing machine when to turn
off under working status . After timing successfully, the indicator light of timing button will be on (Blue color)
Humidity setting button
Press this button to set humidity data you need from 40% RH to 80%RH, 5% RH for one step and cycle as
below : 60%→ 65%→70%→ 75%→ 80%→ 40%→ 45%→50%→ 55%→ 60% .
Under Automatic mode or common mode , the humidity setting function is effective , you can set humidity
data under those modes ,and the indicator light of humidity setting button will be on ( Blue color),
Under Continuously dehumidify mode ,the humidity setting fuction is ineffective. You can not set humidity
data under this mode , and indicator light of humidity setting button will be off
14