Supply From Mains - Chauvin Arnoux PA32ER Manual De Instrucciones

„ Open the elastomer cap and connect the specific 4-point connector to the external power supply input of the instrument.
The indicator lights:
„ green to indicate the power-on condition,
„ orange to indicate that the battery is charging.
N L1 L2
If it blinks, the battery is missing and the instrument is powered by the external power supply alone.

2.2. SUPPLY FROM MAINS

„ Connect the C8-to-banana adapter to the PA32ER power supply.
„ Then connect the C7 cord between the adapter and the mains socket.
„ Open the elastomer cap and connect the specific connector of the power supply to the instrument.
N L1 L2 L3 N L1
QUALI ST R C.A 8345
Class
POWER & QUALITY ANALYSER
L3 N L1 L2 L3
QUALI ST R
C.A 8345
Class
POWER & QUALITY ANALYSER
L2 L3
16
110 - 250 V
50 / 60 Hz