Motorola Symbol LS7808 Guía Rápida De Referencia página 105

Quick Reference Guide 105
Set Defaults
NOTE When scanning the desired bar code, cover other bar code on
page.
Scanning this bar code sets all parameters to their factory default values.
Set Defaults
Host Type Selection
If a Synapse cable (i.e., part number STIxx-xxxx) is used, the scanner
autocoders the type of host, so there is no need to scan host type
selection bar codes.
If a USB interface is used, the scanner autocoders the USB and defaults
to the HID keyboard interface. See page 118 to select the IBM
Hand-Held host type. Refer to the LS7808 Product Reference Guide, p/n
72-69531-XX, for additional USB host types.
If a Keyboard Wedge, RS-232, Wand Emulation or IBM 46XX host is
used, select that host type from the programming bar codes that follow. If
Keyboard Wedge is selected, also select a country keyboard type from
the following pages.
Keyboard Wedge Host Type
IBM PC/AT & IBM PC Compatibles