Motorola Symbol LS7808 Guía Rápida De Referencia página 12

12
Problem
Scanned data is
incorrectly displayed
on the host.
Although the green
and red LEDs are on,
the scanner does not
produce the
omni-directional scan
pattern.
USB or Synapse host
not functioning
properly.
NOTE If the symbol still does not scan, contact distributor or call Motorola
Enterprise Mobility Support. See the back cover for contact
information.
Symbol LS7808 Horizontal Slot Scanner
Possible Causes
Scanner is not
programmed to work
with the host. Check
scanner host type
parameters or editing
options.
The scanner has gone
into the low power
"Motor Sleep" mode.
Scanner does not
recognize host.
Possible Solutions
Ensure proper host is
selected.
For RS-232, ensure the
scanner's communication
parameters match the host's
settings.
For keyboard wedge, ensure
scanner is programmed with
the correct country code and
that the CAPS LOCK key is
off.
Ensure editing options (e.g.,
UPCE-to-UPCA Conversion)
are properly programmed.
Move a bar coded item over
the active scan area to
awaken the unit.
Remove and reinsert external
power supply to force cable to
autodetect correct host.