3.
Apply "Grease" to the "Bush" that comes with this product as accessory.
Insert the cables into each applicable hole of the "Bush".
Please see the fi gure below to check the arrow direction for inserting the cable into the
"Bush".
The "Grease" is used to facilitate inserting the cables.
OUTDOOR
HOUSING
BUSH
M
If you connect the additional ETC cable to the "Bush", remove the pin from the "Bush" before
inserting the cable.
4_ SHG-223
BUSH
BNC CABLE
POWER
(24V) CABLE
ETC CABLE
BUSH
BUSH
PIN
BUSH