Sort Lists - Gallagher HR5 Manual Del Usuario

3E3183 Gallagher HR5 Hand Held EID Tag Reader User Manual

Sort Lists

A sort list contains a list of animal IDs, each with a sor ng
assignment. This assignment may be used to separate animals into
predefi ned groups, or to fl ag specifi c animals for selec on.
The Sort Lists screen shows all the sor ng lists available on the
reader. These lists are imported from APS.
To view a sort list
1. From the Main Menu, select Sort Lists
and press
The sort lists available on the HR5 display.
2. To view the contents of a sort list, select a
list and press
A list of groups that make up the sort list
display.
If sort colours have been set up with
groups in APS, then the group colour
display behind the group number.
The number of tags scanned into each
group is displayed next to the group
name.
• To view the sorted animal
ID's within a group, select the
group to be viewed and press
• A list of animal IDs (VID or EID as set
in the Tag Display screen) are shown.
3. Press the
the Sort Lists screen and press again to
return to the Main Menu.
Note: The sort list 'Empty List' is the factory default and contains
no animals. This can be used to assign sort groups to each animal
as it is scanned, rather than from a predefi ned list.
Sort lists are compiled or edited in APS then downloaded to the
reader. Changes made to a list, will be eff ec ve for all sessions that
use the list a er the change is made.
16
OK
.
OK
.
Return
key once to go back to
OK
.
in