Connection To The Network - FUNAI PB750FX1 El Manual Del Propietario

Standard Video / Audio Connection
right side of this unit
AV cable (supplied)
• Connect this unit directly to the TV. If the
audio / video cables are connected to a
VCR then the picture may be distorted due
to the copyright protection system.
Finding the Video Channel on Your
TV
After you have completed the connection
with your TV, you must find the correct video
channel (external input channel) on your TV.
1
Press [STANDBY/ON Q] to turn on
the unit.
2
Turn on your TV.
3
Press the button on the TV's remote
control that accesses the external
input channel. It may be labeled
"SOURCE", "AV", "AUX" or "SELECT"
(refer to your TV's user manual).
Note
• If the TV is connected by an HDMI cable,
it may take a while for the opening
picture to come up.
• LCD screen is off when a cable is
connected to AV OUT jack or when
HDMI OUT jack is outputting the
picture.
EN

Connection to the Network

By connecting this unit to the Internet, you
Your TV
can update the software via the Internet or
access BD-Live, Netflix, CinemaNow,
Blockbuster and vTuner services.
- For more information about a software
VIDEO IN update, refer to "Network Update" on
page 57.
- For more information about BD-Live,
L
refer to "Enjoying BD-Live Discs with
Internet" on page 30.
AUDIO IN
- For more information about Netflix, refer
to "Netflix Operations" on page 34.
R
- For more information about CinemaNow
and Blockbuster, refer to "CinemaNow /
Blockbuster Operations" on page 36.
- For more information about vTuner, refer
to "Enjoying Internet Radio with vTuner"
on page 38.
Note
• For a stable connection, wired
connection is recommended when
using the following features.
(Using the following features with a
wireless connection can be affected by
other devices using radio frequencies.)
- Video streaming services (Netflix,
CinemaNow and Blockbuster)
- Internet radio service (vTuner)
- Network update
15