System Information; Network Connection - FUNAI PB750FX1 El Manual Del Propietario

Buttons for one touch play:
When this unit is turned on, the TV also is
turned on and the appropriate external input
channel will be selected automatically. The
appropriate external input channel can also
be selected on your TV automatically when
you press [B (play)], [S (previous)],
[T (next)], [the Number buttons],
[DISPLAY], [TOP MENU], or
[POP MENU / MENU] when the unit's power
is on. (Buttons other than [B (play)] work
only with disc inserted.)
Standby
When you press and hold [STANDBY/ON] for
2 seconds, it turns off the power of the TV
first and then turns off the power of this unit.
When the connected fun-Link(HDMI CEC)
compatible display device is turned off, this
unit may also turn off.

System Information

Get & Set Menu Language
The unit recognizes the OSD language set for
the TV and automatically sets the same
language as the player menu language (OSD
menu language) for this unit.
• This feature is available only when
"Auto(XXX)" is selected in "Player Menu" in
the setup menu. (Refer to page 42.)

Network Connection

[SETUP] A "Custom" A "Others" A "Network Connection"
Set up the network connection settings in
order to use BD-Live, Netflix or CinemaNow
or Blockbuster feature, vTuner service or
network update function.
Connection Test
After you enable a network connection or
change the network settings, always perform
the connection test to check if the
connection is correctly made.
1
In "Network Connection" menu,
use [K / L] to select "Connection
Test", then press [OK].
• Connection test will start automatically
and the test result will appear right after
the connection test finishes.
EN
"Testing... " : The test is in progress.
"Pass" : Connection test is
successfully completed.
"Fail" : Connection test failed.
Check the connection
settings.
If the connection test passes, press [OK].
2
Confirmation screen of the network
selection will appear. Press [OK].
• Confirmation screen of network settings
will appear.
3
Press [OK] to go back to the
previous screen, or press [SETUP] to
exit.
Note
• If the connection test passes, you are
ready to use BD-Live, Netflix or
CinemaNow or Blockbuster feature,
vTuner service or network update
function using the Internet without
making any additional settings.
• If the connection test fails, you may
need to change the MAC address
settings of your router. You can check
the MAC address of this unit on
"Custom" (wired or wireless) screen.
• When connecting this unit directly to a
modem for the first time or connecting
it to a modem which was previously
connected to any other network
device(e.g. a router, PC, etc.), you may
have to power cycle the modem to
reset the settings on the modem.
• "Connection Test" is not available when
"Disable" is selected in "Network
Connection".
Network Selection
Wired
Select "Wired" if you made a wired
connection and set the setting to
"Easy"(wired) or "Custom"(wired), in
accordance with your network environment.
(continue on next page)
51