Adjusting The Picture; Virtual Surround; Pip (Bonusview) Setting - FUNAI PB750FX1 El Manual Del Propietario

3
Press [B (play)] to return to normal
playback.
Note
• Picture adjustment and audio language
setting cannot be changed during this
function.
• Virtual surround does not work during
this function.
• This function may not work at some
points on a disc.
• During this function, 2ch LPCM will be
output from HDMI OUT jack.

Adjusting the Picture

You can adjust the picture quality.
1
During playback, press [MODE]
repeatedly until
2
Use [K / L] to select your desired
item, then use [s / B] to adjust the
setting.
Black Level
HD Noise Reduction
e.g.) DVD-video
Black Level
You can adjust the black level setting to make
the black parts of the pictures as bright as
you prefer. You can select "On" or "Off".
"On" : Makes the dark parts brighter.
"Off" : Shows the original picture as
recorded.
HD Noise Reduction
Reduces the noise of the playback picture.
"Off" : Shows the original picture as
recorded.
"On" : Executes HD noise reduction which
detects and deletes the noise of the
playback picture.
EN
appears.
On
Off
3
Press [RETURN] to exit.
Note
• The setting will remain the same even if
the unit is turned to the standby mode.
• "Black Level" is only effective when the
picture is output from AV OUT jack.
• You cannot adjust the setting during
rapid playback.

Virtual Surround

You can enjoy stereophonic virtual space
through your existing 2 channel stereo
system.
1
During playback, press [MODE].
2
Use [K / L] to select your desired
setting.
Off
"Off" : No surround effect
"1" : Natural surround effect
"2" : Stronger surround effect
3
Press [RETURN] to exit.
Note
• Set the virtual surround setting to "Off"
or lower the volume if the sound is
distorted.
• Virtual surround does not function
during rapid playback.
• For the virtual surround, audio signal
will always be 2-channel LPCM.

PIP (BONUSVIEW) Setting

Some BD-video have the PIP function which
enables you to display the secondary video
in the primary video. You can call up the
secondary video by pressing [MODE]
whenever the scene contains the secondary
video.
(continue on next page)
29