LaserLiner MultiBeam-Laser MBL 5 Instrucciones De Uso página 8

MultiBeam-Laser MBL 5
1
8
7
6
1 Laser emitting window
2 Rubber grip housing
3 Battery compartment-
cover
4 1/4" nut for connection
to camera tripod
5 ON / OFF-Switch
Pendulum lock
6 Self-leveling pendulum
(inside)
7 Front beam calibration
port (X-axis)
Battery replacement
Make sure the batteries
are correctly poled!
Switch on
Assemble with connecting screw (11) MultiBeam-Laser 5
and magnetic base. Switch the unit on (5). The laserdots
will be projected.
Applications (examples see P. 2)
A Aligning
B Horizontal levelling
C Plumb line
D Height projection
Note:
If the device is positioned too much out of level (more
than 4° or 6°), the laser will blink. Position the device on
a more level surface.
8
2
4
5
ENGLISH
Magnetic base
3
10
9
13
8 Side beam calibration
port (Y-axix)
9 Magnets
10 5/8" nut for
connection to
constrution tripod
(mount from bottom).
11 Connecting screw
MultiBeam 5
12 Screw mounting holes
(accepts standard
drywall screws)
13 Slot for tightning belt
4
12
A
B
11