Melnor 3025 Manual Del Usuario página 4

TO SET CLOCK
Setting the clock enables you to program customized watering schedules relative to the current time of day. After
installing batteries timer will go to timeset mode to set clock.
SETUP
NOTE: To reset clock, press SETUP, unit will beep two (2) times.
Press until TIMESET flashes.
ACCEPT
Press Accept
12-HOUR VS. 24-HOUR CLOCK
Unit defaults to AM/PM (12-hour) mode, number "12" will flash.
If 24-hour clock is desired, press
24-hour mode.
NOTE: Press to correct mistakes after pressing the Accept
time and move back one step after each press.
TO SET HOUR
After selecting 12- or 24-hour clock (by pressing
Press or
(Holding down keys will scroll numbers for faster selection.)
ACCEPT
Press Accept
.
. Unit will beep one (1) time. Number "13" will be flashing when unit is in
to select current hour. Unit will beep one (1) time for each press.
when current hour flashes.
key. When
).
is pressed, unit will beep one (1)