Melnor 3025 Manual Del Usuario página 7

3) TO SET STOP TIME OF 1ST CYCLE
Press or
Holding down key will scroll numbers for faster selection.
Press Accept
ACCEPT
Unit will beep one (1) time and minutes will flash.
Press or
Holding down key will scroll numbers for faster selection.
Press Accept
ACCEPT
Unit will beep one (1) time.
If in 12-hour mode, press Accept
to Start Time for next cycle if more than one cycle is desired. Repeat steps "2" and "3" above for each
additional cycle. After last cycle, unit will go to Skip Day mode and the arrow
"Skip Day" on left of screen. This step is skipped for 24-hour mode and unit will go directly to Start Time for
next cycle if more than one cycle is desired. Repeat steps "2" and "3" above for each additional cycle. After
last cycle, unit will go to Skip Day mode and the arrow
4) TO SET SKIP DAYS
Press or
Choosing "NO" will repeat watering schedule every day.
Choosing "1" will repeat watering schedule second day.
Choosing "2" will repeat watering schedule third day.
Choosing "3" will repeat watering schedule fourth day.
Press Accept
ACCEPT
mode and the number "1" will be flashing with the first created schedule.
Press Accept
ACCEPT
number (if any) up to 3. After 3, you must erase an existing schedule by selecting a user set number and
press Accept
to select Stop Time HOUR. Unit will beep one (1) time for each key press.
when desired Stop Time HOUR flashes.
to select Stop Time MINUTES. Unit will beep one (1) time for each key press.
desired Stop Time MINUTES flash.
after selecting proper AM/PM setting using
to select Skip Days.
to choose desired skip day is flashing. Unit will beep one (1) time and go to the User Set
to store schedule in flashing number. Timer will automatically select the next available
. This will erase the existing shedule for that number.
indicator will flash next to "Skip Day" on left of screen.
or . Unit will go directly
indicator will flash next to