The Package Contains; Installation Environment - Quick DCS 1083 Manual De Instalacion Y Uso

CHARACTERISTICS AND INSTALLATION
GB
DCS SERIES DIODE CHARGE SEPARATORS
The advantages offered by the DCS charge separators are:
• Input voltage up to 31Vdc.
• S terminal for compensating separator voltage drop (in pre-set sources).
• Functioning over a wide range of environmental temperatures.
• Installation and wiring facilitated by the compact design of the separator.
INSTALLATION
BEFORE USING THE CHARGE SEPARATOR, READ THIS INSTRUCTION MANUAL CAREFULLY. IF IN
DOUBT, CONTACT YOUR NEAREST QUICK
F
In case of discordance or errors in translation between the translated version and the original text in the
Italian language, reference will be made to the Italian or English text.
F
This device was designed and constructed for use on recreational crafts.
Other forms of use are not permitted without written authorization from the company Quick
THE DCS SERIES OF CHARGE SEPARATORS HAVE BEEN DESIGNED FOR INTERNAL FIXED INSTALLATIONS.
®
Quick charge separators have been designed and constructed for the purposes described in this instruction
manual. The Quick ® company shall accept no responsibility for direct or indirect damages caused by improper
use of the instrument, or by incorrect installation or by possible errors in this manual.
ANY TAMPERING WITH THE CHARGE SEPARATOR BY UNAUTHORIZED PERSONS ANNULS THE
GUARANTEE.
THE PACKAGE CONTAINS: charge separator - conditions of warranty - manual of installation and use.

INSTALLATION ENVIRONMENT

Install the charge separator in a dry, ventilated place.
A certain amount of heat develops while it is working; it is
therefore essential for the environment where it is installed
to have sufficient ventilation to allow for optimal functioning
of the apparatus.
The charge separator can be installed in a horizontal or ver-
tical position however.
We recommend vertical installation since the natural con-
vection of the heat will aid the cooling of the instrument.
The charge separator (excluding the supporting base) must
be at least 5 cm from walls or objects.
The base to which the separator is fixed must be able to
with stand a temperature of at least 100 °C.
WARNING: the external surface of the charge separator is used as a heat dissipator, and can therefore
reach high temperatures (danger of burns). Leave the instrument to cool before handling it.
8
® RETAILER OR CUSTOMER SERVICE.
5 cm
® .
5 cm
XXX
5 cm
5 cm
DCS - REV001A