Makita ADP03 Manual De Instrucciones página 7

How to use automatic refreshing adapter
Insert a battery cartridge into the automatic refreshing adapter
Then, proceed along the way "Yes" shown below when one (even one) or more of the following statements are respon-
sive to reference to the battery you have inserted. If not, proceed along the way "No" shown below.
• The battery cartridge is new and out of use.
• The battery cartridge has been UNUSED for approximately six months.
• Over approximately one week has passed after the battery cartridge was last inserted into this adapter.
• You intend to check the battery capacity.
Yes
Press the conditioned refreshing button.
Conditioned refreshing charge starts.
Conditioned charge is completed.
Battery capacity is shown with refreshing light.
Automatic refreshing charge
• The adapter can keep the battery cartridge in activate condition automatically by quick refreshing charge with
searching the optimal refreshing interval for the individual battery cartridge.
• The automatic refreshing time depends on remainder of the battery capacity.
• After automatic refreshing charge, the refreshing lights will not indicate the capacity for a new battery cartridge.
None of your actions are needed. (The following
actions are taken automatically).
According to the conditions of your battery cartridge,
the adapter will determine whether
charge is needed or not.
Refreshing is
necessary.
Automatic refreshing
charge starts.
Automatic refreshing charge or
normal charge is completed.
No
refreshing
Refreshing is
not necessary.
Normal charge starts.
7