Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
603.book Page 6 Friday, September 22, 2006 1:28 PM
Pairing the BHS-603 and your mobile phone
Pairing is the process of linking BHS-603 with your compatible Bluetooth mobile phone*. After
this process is completed, you can use the BHS-603 with the paired mobile phone. If you want
to use the BHS-603 with another mobile phone, you must repeat the pairing process again.
Even though BHS-603 can be paired with up to 8 compatible phones it can only be connected
to one phone at a time. Once it is paired with 8 phones, the 9
st
1
paired device.
Pairing process
1.
Power on the headset, press and hold both Volume + and Volume - buttons until the blue
and red lights start flashing alternately.
2.
Release the button. BHS-603 is now in pairing mode.
3.
Check your phone user guide for details on how to search and pair.
4.
When phone has found the headset, it will show Iqua BHS-603 on its screen.
5.
In order to pair with the phone, enter the PIN code 0000.
6.
After pairing, BHS-603 automatically connects with your mobile phone. Once pairing and
connection are succeeded, blue light flashes twice every 8 seconds. The headset is now
ready to make and receive calls.
* For latest compatibility information please visit www.iqua.com
th
paired device will replace the
6
Publicidad
Tabla de contenido
