Iqua BHS-603 Guia Del Usuario página 9

603.book Page 7 Friday, September 22, 2006 1:28 PM
EN
Disconnecting BHS-603 and your phone
To disconnect BHS-603 and the phone, simply switch off the headset.
Reconnecting the paired BHS-603 with the phone
To reconnect BHS-603 to the last phone used, simply switch on the headset and it will
automatically connect to the phone.
There are occasions when headset is temporarily out of Bluetooth operating range (up to
10 meters, e.g. user wearing the headset walks away from the phone), the headset will be
disconnected from the phone and user will hear a warning tone from the headset). Headset
is now in "powered on but no Bluetooth connection" –mode (blue light flashes once every
5 seconds). If the headset is back in range within 10 minutes, the BHS-603 auto-reconnects
with the last phone. If the headset is out of range for over 10 minutes, long press both
Multifunction and Volume + buttons or both Multifunction and Volume - buttons to re-
activate the connection.
7